ZGTEK Co., Ltd.

Specification Model: DLN-24-5 Cage wire quantity: 8/10/12/14/16/18/20/22/24 Ring space: can be set at any value Cage outer diameter: 100-200mm Rail length: standard 7m, up to 10m can be customized Input voltage: 380V(2-phase) or customized Power frequency: 50/60Hz Designed max capacity of transformers: 80KVA Instant power in sync mode: 36KVA Instant power in async(time-sharing) mode: 18KVA Transformers: 2sets Air pressure: 0.6-0.8MPa Required ir flow: 300L/min Cooling method: natural cooling Weight: about 1000KG Features Very high welding speed, e.g. for a 12-wire cage, one ring takes only 0.18s Automatic cage pulling, ring space can be set in the program through the user-friendly interface. The cage pulling carriage is equipped with bearings, runs on the rail with linear guides, it's smooth and precise Function of bad weld detection and auto re-welding Material selection, different welding parameters for mild steel, galvanized steel and stainless steel Auto compensation gives enough space to insert the ring when the ring distance is short Ring space precision is 0.1mm; cage pulling speed is 0.4m/s Rails and material shelf equipped and connected to the machine. The front end of the rail is adjustment-free. Good linearity can be achieved for wire cages Four air tanks, short air route inside the machine ensures quick response of the cylinders 25mm thick front plate resulted from one-time machining, firmly secure that the welding cylinders are on the same plane and perpendicular to the axes, thus the linearity of the cage can be ensured Stroke-adjustable cylinders increase welding speed, pre-pressing only takes 0.08s Equipped with powerful micro-computing unit Sync/Time-sharing mode can put two transformers work at the same time or one after another, secure good welding quality even when the power supply is not very sufficient